KTI Networks KS-2262 Manual de usuario Pagina 168
- Pagina / 256
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
166
set state
Syntax:
set state <ip> <port-number> <secret-key> <Accounting Service> <Accounting
Server> <Accounting Port>
Description:
To configure the settings related with 802.1X Radius Server and Accounting service.
Argument:
ip: xxx.xxx.xxx.xxx
port-number:1~65535
secret-key: The length of secret-key is from 1 to 31
Accounting Service: 0 for disable, 1 for enable
Accounting Server: xxx.xxx.xxx.xxx
Accounting Port:1~65535
Possible value:
<port-number> : 1~65535, default 1812
<Accounting-port> : 1~65535, default 1813
Example:
FE2262(802.1X)# set state 192.168.1.1 1812 password 1 192.168.1.1 1813
---------------------------
set suppTimeout
Syntax:
set suppTimeout <port-range> <sec>
Description:
A timer used by the Backend Authentication state machine in order to determine
timeout conditions in the exchanges between the Authenticator and the Supplicant
or Authentication Server. The initial value of this timer is either suppTimeout or
serverTimeout, as determined by the operation of the Backend Authentication state
machine.
Argument:
<port range> : syntax 1,5-7, available from 1 to 26
<sec> : timer, range 1-65535
Possible value:
<port range> : 1 to 26
<sec> : 1-65535, default is 30
Example:
FE2262 (802.1x)# set suppTimeout 2 30
---------------------------
set txPeriod
Syntax:
set txPeriod <port-range> <sec>
Description:
A timer used by the Authenticator PAE state machine to determine when an EAPOL
PDU is to be transmitted.
Argument:
<port range> : syntax 1,5-7, available from 1 to 26
<sec> : timer, range 1-65535
Possible value:
<port range> : 1 to 26
<sec> : 1-65535, default is 30
Example:
- L2 Managed Switch 1
- User's Manual 1
- Table of Contents 3
- Caution 6
- About this user’s manual 7
- 1. Introduction 8
- Key Features in the Device 9
- 1-2. Checklist 10
- 1-3. Features 10
- LED Color Function 13
- 2. Installation 17
- Fig. 2-2 19
- GIGABIT L2 MANAGED SWITCH 24
- Default IP Setting: 25
- IP address = 192.168.1.1 25
- Table 2-3 26
- Ethernet LAN 27
- 2-1-5. IP Address Assignment 28
- 1 0000000 30
- 1 1111111 30
- Fig. 2-12 32
- 2-2. Typical Applications 33
- 3. Operation of 35
- Web-based Management 35
- Fig. 3-2 37
- 3-1-1. System Information 40
- 3-1-2. IP Configuration 42
- 3-1-3. Time Configuration 45
- Fig. 3-5 47
- 3-1-4. Account Configuration 48
- 3-1-5. Management Security 49
- Fig. 3-7 50
- 3-1-6. Virtual Stack 52
- Fig. 3-8 53
- 3-2. Port Configuration 54
- Fig. 3-10 57
- 3-2-2. Port Configuration 59
- 3-2-3. Port Description 61
- 3-2-5. Simple Counter 62
- 3-2-4. Detail Counter 64
- 3-3. SNMP Configuration 67
- 3-4. Loop Detection 69
- 3-5. DHCP Boot 71
- 3-6. IGMP Snooping 72
- Fig. 3-19 74
- 3-7. VLAN 76
- Fig. 3-20 78
- 3-7-2. Tag-based Group 79
- Fig. 3-22 80
- 3-7-3. PVID 81
- 3-7-4. Port-based Group 83
- Fig. 3-25 84
- 3-7-5. Management VLAN 85
- 3-8. MAC Table 86
- Fig. 3-26 87
- Fig. 3-27 88
- Fig. 3-28 89
- Fig. 3-29 91
- 3-9. GVRP Configuration 93
- Fig. 3-31 96
- Fig. 3-32 98
- 3-10. STP Configuration 99
- Fig. 3-33 100
- 3-10-2. STP Configuration 101
- Fig. 3-34 102
- 105
- Fig. 3-35 105
- 3-11. Trunking Configuration 106
- Fig.3-36 109
- Fig.3-37 110
- Fig.3-39 112
- 3-12. 802.1x Configuration 113
- Fig. 3-40 114
- Table 3-3 117
- Fig. 3-43 118
- Default port number is 1813 119
- Disable 120
- 802.1x with Multi-host 120
- Fig. 3-45 121
- ForceUnauthorized: 122
- ForceAuthorized: 122
- Fig. 3-46 123
- 3-13. Alarm Configuration 124
- Fig. 3-47 125
- Fig. 3-48 126
- 3-14. Configuration 127
- 3-14-1. Save/Restore 128
- 3-14-2. Config File 129
- 3-15. Security 130
- ) beside the port x and 130
- ) beside 130
- Fig. 3-52 131
- Fig. 3-53 132
- 3-16. Bandwidth Management 133
- Fig. 3-55 135
- Fig. 3-56 139
- Fig. 3-57 140
- Fig. 3-58 141
- Fig. 3-59 142
- Fig. 3-60 143
- Fig. 3-61 144
- Priority 145
- Fig. 3-62 145
- Fig. 3-63 146
- 3-18. Diagnostics 147
- Fig. 3-65 148
- Fig. 3-66 149
- 3-19. TFTP Server 150
- 3-20. Log 151
- 3-21. Firmware Upgrade 153
- 3-22. Reboot 154
- 3-23. Logout 155
- 4. Operation of CLI 156
- Management 156
- Fig. 4-1 157
- Fig. 4-2 157
- 4-2. Commands of CLI 158
- : 169
- account 171
- alarm 173
- config-file 184
- 192.168.1.115 is alive 188
- loop-detection (LD) 201
- mac-table 204
- from 0 to 3 207
- management 209
- available from 0 to 63 218
- reboot 223
- <<mirror>> 225
- Example: 228
- system 233
- trunk 238
- 1 to 26 240
- Syntax: 1,5-7 244
- Syntax 1,5-7, available 246
- master or slave 250
- 5. Maintenance 251
- Appendix A 252
- Technical Specifications 252
- Hardware Specifications 253
- Appendix B 256
- Null Modem Cable 256
- Specifications 256
Relacionado con productos y manuales para Los conmutadores de red KTI Networks KS-2262
(53 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.088 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales