KTI Networks KS-115F Series Manual de usuario

-12-Installation Guide10/100 Fast Ethernet SwitchKS-115F SeriesP/N:750-0136-001DOC.000112-KS115F-K

-6-3. Making Network Connections3.1 Network Switched PortsThere are five ports on the switch for connection to five LAN segments.Each segment is an in

-7-The following figure illustrates the front panels with different fiber connectors:3.2 UTP CableWhen making a connection to another device using s

-8-3.3 Fiber CablesFor different fiber connections, several alternative models can beselected for different fiber connections as follows:Model Connect

-9-3.4 Network ConnectionsThe switch can support connections to the following devices:_ 10BASE-T network cards_ 10/100BASE-TX network cards_ 10BASE-T

-10-3.5 Operating ModeFour TP ports are designed as auto-negotiation capable switched ports.Each port can determine the speed and duplex type used au

-11-4. LED Indicators4.1 LED PanelThe switch provides comprehensive LED indicators for diagnosing andmonitoring the operation of the unit as illustrat

-13- 1999 KTI Networks Inc. All rights reserved. No part of this documen-tation may be reproduced in any form or by any means or used to makeany dire

-15-The information contained in this document is subject to change without prior notice.Copyright  KTI. All Rights Reserved.TRADEMARKSEthernet is a

-16-Table of Contents1. Introduction ... 11.1 Features ...

-1-1. IntroductionDriven by recent advances in desktop computing technology, todaysnetwork applications have increased in speed, power and the abilit

-2-1.1 FeaturesDesigned for resolving congestion problems caused by bandwidth-hun-gry devices and bandwidth-intensive applications as well as a high n

-3-1.2 SpecificationsPort 1 - 4 MDI-X RJ-45 jacks for 10/100BASE-TX connectivityPort 5 One fiber connector for 100BASE-FX connectivityCables 10BASE-T

-4-2. Installing the Switch2.1 UnpackingCheck to see that you have everything before you start the installation. Installation guide The switch unit

-5-The DC power socket for the AC power adapter is located on the rear ofthe switch as shown below:2.3 Installing the Switch1. Install the switch with