KTI Networks KS-2262 Manual de usuario Pagina 127
- Pagina / 256
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
125
3-14. Configuration
The switch supports three copies of configuration, including the default configuration,
working configuration and user configuration for your configuration management.
All of them are listed and described below respectively.
Default Configuration:
This is factory setting and cannot be altered. In Web UI, two restore default
functions are offered for the user to restore to the default setting of the switch. One
is the function of “Restore Default Configuration included default IP address”, the IP
address will restore to default “192.168.1.1” as you use it. The other is the function
of “Restore Default Configuration without changing current IP address”; the IP
address will keep the same one that you had saved before by performing this
function.
Working Configuration:
It is the configuration you are using currently and can be changed any time. The
configurations you are using are saved into this configuration file. This is updated
each time as you press <Apply> button.
User Configuration:
It is the configuration file for the specified or backup purposes and can be updated
while having confirmed the configuration. You can retrieve it by performing Restore
User Configuration.
Fig. 3-49
- L2 Managed Switch 1
- User's Manual 1
- Table of Contents 3
- Caution 6
- About this user’s manual 7
- 1. Introduction 8
- Key Features in the Device 9
- 1-2. Checklist 10
- 1-3. Features 10
- LED Color Function 13
- 2. Installation 17
- Fig. 2-2 19
- GIGABIT L2 MANAGED SWITCH 24
- Default IP Setting: 25
- IP address = 192.168.1.1 25
- Table 2-3 26
- Ethernet LAN 27
- 2-1-5. IP Address Assignment 28
- 1 0000000 30
- 1 1111111 30
- Fig. 2-12 32
- 2-2. Typical Applications 33
- 3. Operation of 35
- Web-based Management 35
- Fig. 3-2 37
- 3-1-1. System Information 40
- 3-1-2. IP Configuration 42
- 3-1-3. Time Configuration 45
- Fig. 3-5 47
- 3-1-4. Account Configuration 48
- 3-1-5. Management Security 49
- Fig. 3-7 50
- 3-1-6. Virtual Stack 52
- Fig. 3-8 53
- 3-2. Port Configuration 54
- Fig. 3-10 57
- 3-2-2. Port Configuration 59
- 3-2-3. Port Description 61
- 3-2-5. Simple Counter 62
- 3-2-4. Detail Counter 64
- 3-3. SNMP Configuration 67
- 3-4. Loop Detection 69
- 3-5. DHCP Boot 71
- 3-6. IGMP Snooping 72
- Fig. 3-19 74
- 3-7. VLAN 76
- Fig. 3-20 78
- 3-7-2. Tag-based Group 79
- Fig. 3-22 80
- 3-7-3. PVID 81
- 3-7-4. Port-based Group 83
- Fig. 3-25 84
- 3-7-5. Management VLAN 85
- 3-8. MAC Table 86
- Fig. 3-26 87
- Fig. 3-27 88
- Fig. 3-28 89
- Fig. 3-29 91
- 3-9. GVRP Configuration 93
- Fig. 3-31 96
- Fig. 3-32 98
- 3-10. STP Configuration 99
- Fig. 3-33 100
- 3-10-2. STP Configuration 101
- Fig. 3-34 102
- 105
- Fig. 3-35 105
- 3-11. Trunking Configuration 106
- Fig.3-36 109
- Fig.3-37 110
- Fig.3-39 112
- 3-12. 802.1x Configuration 113
- Fig. 3-40 114
- Table 3-3 117
- Fig. 3-43 118
- Default port number is 1813 119
- Disable 120
- 802.1x with Multi-host 120
- Fig. 3-45 121
- ForceUnauthorized: 122
- ForceAuthorized: 122
- Fig. 3-46 123
- 3-13. Alarm Configuration 124
- Fig. 3-47 125
- Fig. 3-48 126
- 3-14. Configuration 127
- 3-14-1. Save/Restore 128
- 3-14-2. Config File 129
- 3-15. Security 130
- ) beside the port x and 130
- ) beside 130
- Fig. 3-52 131
- Fig. 3-53 132
- 3-16. Bandwidth Management 133
- Fig. 3-55 135
- Fig. 3-56 139
- Fig. 3-57 140
- Fig. 3-58 141
- Fig. 3-59 142
- Fig. 3-60 143
- Fig. 3-61 144
- Priority 145
- Fig. 3-62 145
- Fig. 3-63 146
- 3-18. Diagnostics 147
- Fig. 3-65 148
- Fig. 3-66 149
- 3-19. TFTP Server 150
- 3-20. Log 151
- 3-21. Firmware Upgrade 153
- 3-22. Reboot 154
- 3-23. Logout 155
- 4. Operation of CLI 156
- Management 156
- Fig. 4-1 157
- Fig. 4-2 157
- 4-2. Commands of CLI 158
- : 169
- account 171
- alarm 173
- config-file 184
- 192.168.1.115 is alive 188
- loop-detection (LD) 201
- mac-table 204
- from 0 to 3 207
- management 209
- available from 0 to 63 218
- reboot 223
- <<mirror>> 225
- Example: 228
- system 233
- trunk 238
- 1 to 26 240
- Syntax: 1,5-7 244
- Syntax 1,5-7, available 246
- master or slave 250
- 5. Maintenance 251
- Appendix A 252
- Technical Specifications 252
- Hardware Specifications 253
- Appendix B 256
- Null Modem Cable 256
- Specifications 256
Relacionado con productos y manuales para Los conmutadores de red KTI Networks KS-2262
(53 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.167 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales