KTI Networks KS-2262 Manual de usuario Pagina 166
- Pagina / 256
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
164
---------------------------
set port-control
Syntax:
set port-control <port-range> <authorized>
Description:
To set up 802.1X status of each port.
Argument:
<port range> : syntax 1,5-7, available from 1 to 26
<authorized> : set up the status of each port
0:ForceUnauthorized
1:ForceAuthorized
2:Auto
Possible value:
<port range> : 1 to 26
<authorized> : 0,1 or 2
Example:
FE2262(802.1x)# set port-control 2 2
---------------------------
set quiet-period
Syntax:
set quiet-period <port-range> <sec>
Description:
A timer used by the Authenticator state machine to define periods of time during
when it will not attempt to acquire a Supplicant.
Argument:
<port range> : syntax 1,5-7, available from 1 to 26
<sec> : timer, range 0-65535
Possible value:
<port range> : 1 to 26
<sec> : 0-65535, default is 60
Example:
FE2262 (802.1x)# set quiet-period 2 30
---------------------------
set reAuthEnabled
Syntax:
set reAuthEnabled <port-range> <ebl>
Description:
A constant that define whether regular reauthentication will take place on this port.
Argument:
<port range> : syntax 1,5-7, available from 1 to 26
<ebl> :
0:”OFF” to disable reauthentication
1:”ON” to enable reauthentication
Possible value:
<port range> : 1 to 26
<ebl> : 0 or 1, default is 1
Example:
FE2262 (802.1x)# set reAuthEnabled 2 1
- L2 Managed Switch 1
- User's Manual 1
- Table of Contents 3
- Caution 6
- About this user’s manual 7
- 1. Introduction 8
- Key Features in the Device 9
- 1-2. Checklist 10
- 1-3. Features 10
- LED Color Function 13
- 2. Installation 17
- Fig. 2-2 19
- GIGABIT L2 MANAGED SWITCH 24
- Default IP Setting: 25
- IP address = 192.168.1.1 25
- Table 2-3 26
- Ethernet LAN 27
- 2-1-5. IP Address Assignment 28
- 1 0000000 30
- 1 1111111 30
- Fig. 2-12 32
- 2-2. Typical Applications 33
- 3. Operation of 35
- Web-based Management 35
- Fig. 3-2 37
- 3-1-1. System Information 40
- 3-1-2. IP Configuration 42
- 3-1-3. Time Configuration 45
- Fig. 3-5 47
- 3-1-4. Account Configuration 48
- 3-1-5. Management Security 49
- Fig. 3-7 50
- 3-1-6. Virtual Stack 52
- Fig. 3-8 53
- 3-2. Port Configuration 54
- Fig. 3-10 57
- 3-2-2. Port Configuration 59
- 3-2-3. Port Description 61
- 3-2-5. Simple Counter 62
- 3-2-4. Detail Counter 64
- 3-3. SNMP Configuration 67
- 3-4. Loop Detection 69
- 3-5. DHCP Boot 71
- 3-6. IGMP Snooping 72
- Fig. 3-19 74
- 3-7. VLAN 76
- Fig. 3-20 78
- 3-7-2. Tag-based Group 79
- Fig. 3-22 80
- 3-7-3. PVID 81
- 3-7-4. Port-based Group 83
- Fig. 3-25 84
- 3-7-5. Management VLAN 85
- 3-8. MAC Table 86
- Fig. 3-26 87
- Fig. 3-27 88
- Fig. 3-28 89
- Fig. 3-29 91
- 3-9. GVRP Configuration 93
- Fig. 3-31 96
- Fig. 3-32 98
- 3-10. STP Configuration 99
- Fig. 3-33 100
- 3-10-2. STP Configuration 101
- Fig. 3-34 102
- 105
- Fig. 3-35 105
- 3-11. Trunking Configuration 106
- Fig.3-36 109
- Fig.3-37 110
- Fig.3-39 112
- 3-12. 802.1x Configuration 113
- Fig. 3-40 114
- Table 3-3 117
- Fig. 3-43 118
- Default port number is 1813 119
- Disable 120
- 802.1x with Multi-host 120
- Fig. 3-45 121
- ForceUnauthorized: 122
- ForceAuthorized: 122
- Fig. 3-46 123
- 3-13. Alarm Configuration 124
- Fig. 3-47 125
- Fig. 3-48 126
- 3-14. Configuration 127
- 3-14-1. Save/Restore 128
- 3-14-2. Config File 129
- 3-15. Security 130
- ) beside the port x and 130
- ) beside 130
- Fig. 3-52 131
- Fig. 3-53 132
- 3-16. Bandwidth Management 133
- Fig. 3-55 135
- Fig. 3-56 139
- Fig. 3-57 140
- Fig. 3-58 141
- Fig. 3-59 142
- Fig. 3-60 143
- Fig. 3-61 144
- Priority 145
- Fig. 3-62 145
- Fig. 3-63 146
- 3-18. Diagnostics 147
- Fig. 3-65 148
- Fig. 3-66 149
- 3-19. TFTP Server 150
- 3-20. Log 151
- 3-21. Firmware Upgrade 153
- 3-22. Reboot 154
- 3-23. Logout 155
- 4. Operation of CLI 156
- Management 156
- Fig. 4-1 157
- Fig. 4-2 157
- 4-2. Commands of CLI 158
- : 169
- account 171
- alarm 173
- config-file 184
- 192.168.1.115 is alive 188
- loop-detection (LD) 201
- mac-table 204
- from 0 to 3 207
- management 209
- available from 0 to 63 218
- reboot 223
- <<mirror>> 225
- Example: 228
- system 233
- trunk 238
- 1 to 26 240
- Syntax: 1,5-7 244
- Syntax 1,5-7, available 246
- master or slave 250
- 5. Maintenance 251
- Appendix A 252
- Technical Specifications 252
- Hardware Specifications 253
- Appendix B 256
- Null Modem Cable 256
- Specifications 256
Relacionado con productos y manuales para Los conmutadores de red KTI Networks KS-2262
(53 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.116 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales