KTI Networks KSC-240 Guía de instalación descargar pdf (Pagina 25)

-25-

SW1-5

RTS-D Disable RTS control for RS-485/422 driver

RTS-E Enable RTS control for RS-485/422 driver

RTS control method allows the connected RS-232 device (such as a PC)

to control RTS signal (CTS input at the converter end) by software to

enable or disable RS-485/422 driver. [RTS-D] setting is used to disable

RTS control method.

SW1-6

RXC RS-485/422 receiver enable control by RTS or ADC

RXE RS-485/422 receiver is forced to enable.

[RXC] setting enable to use the same [TXC] logic but reverse it as RXC

for the RS-485/422 receiver control. It means when the driver is enabled

the receiver is disabled. The receiver is enabled when the driver is dis-

abled. This setting is applied when a half-duplex communication is

adopted.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 42 43

Sin comentarios

KTI Networks KSC-240 Guía de instalación Pagina 25