KTI Networks KCD-303P-A1 Manual de usuario descargar pdf (Pagina 15)

15/18

3. Making LAN Connections

3.1 Making Copper Port (RJ-45) Connections

The copper ports support the following connection types and distances:

Network Cables

10BASE-T: 2-pair UTP Cat. 3,4,5 , EIA/TIA-568B 100-ohm

100BASE-TX: 2-pair / 4-pair UTP Cat. 5, EIA/TIA-568B 100-ohm

Link distance: Up to 100 meters

Auto MDI/MDI-X Function

This function allows the port to auto-detect the twisted-pair signals and adapts itself to form a valid

MDI to MDI-X connection with the remote connected device automatically. No matter a straight

through cable or crossover cable connected, the ports can sense the receiving pair automatically and

configure self to match the rule for MDI to MDI-X connection. It simplifies the cable installation.

Auto-negotiation Function

The ports are featured with auto-negotiation function and full capability to support connection to any

Ethernet devices. The port performs a negotiation process for the speed and duplex configuration with

the connected device automatically when each time a link is being established. If the connected device

is also auto-negotiation capable, both devices will come out the best configuration after negotiation

process. If the connected device is incapable in auto-negotiation, the switch will sense the speed and

use half duplex for the connection.

1 2 ... 10 11 12 13 14 15 16 17 18

Sin comentarios

KTI Networks KCD-303P-A1 Manual de usuario Pagina 15