KTI Networks KS-324F Manual de usuario descargar pdf (Pagina 7)

3. Configure the Network Connection

3.1 Connecting Devices to the 24port Switch

[ Connection Guidelines: ]

l Use Category 3 or 5 twisted-pair Ethernet cable when connecting 10BaseT

devices to the switch (cable pin assignments defined in Appendix A)

l Use Category 5 (straight-through) twisted-pair Ethernet cable when

connecting 100BaseTX devices to the switch (cable specifications are defined

in Appendix B)

l Always limit the cable distance to 100 meters (328 ft) as defined by IEEE

specification

l If your switch has a FX port, you can connect long distance fiber optic cable

to the switch.

l Because this switch supports Auto MDI/MDI-X detection, you can use normal

straight through cable for both workstation connection and hub/switch

cascading.

3.2 Connecting to Another Ethernet Switch/Hub

This 24port Switch can be connected to existing 10 Mbps or 100 Mbps

hubs/switches. Because all the TP ports on the 24port Switch are Auto

MDI/MDI-X, you can connect from any TP port of the 24port Switch to the

MDI or MDI-X port of another hub/switch with Straight Through or crossover

cables.

100BASETX :

Cat-5 Twisted-pair cable

Max. 100m (328) 10BASET :

Cat-3,4,5 Twisted-pair cable

Max. 100m (328 )

feet)

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Sin comentarios

KTI Networks KS-324F Manual de usuario Pagina 7