KTI Networks KCD-3PB Guía de instalación descargar pdf (Pagina 22)

-22-

DC2 + and DC2 - can be installed with another power-pair for delivering the

main power input to next converter in a cascading way.

Note: Only up to four converter units can be cascaded to receive power

from one main power input source.

DC Power Jack

Connector: Jack D 6.3mm D 2.0mm

AC Power Adapters: Optional commercial rated adapters are available

for purchasing.

Rated AC120V/60Hz DC7.5V 1A

Rated AC230V/50Hz DC7.5V 1A

Rated AC100V/50-60Hz DC7.5V 1A

Rated AC240V/50Hz DC7.5V 1A

Steps to apply the power to the converters are:

1. Connect power adapter DC plug to the DC power jack of the

converter before connecting to the AC outlet.

2. Connect the power adapter to the AC outlet.

Note: Before you begin the installation, check the AC voltage of your

area. The AC power adapter which is used to supply the DC power

for the unit should have the AC voltage matching the commercial

power voltage in your area.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29

Sin comentarios

KTI Networks KCD-3PB Guía de instalación Pagina 22