KTI Networks KC-300D-SL2A Guía de instalación descargar pdf (Pagina 11)

-11-

1.4 Special Functions

Auto MDI/MDI-X Function

This function allows the TP port to auto-detect the twisted-pair signals

and adapts itself to form a valid MDI to MDI-X connection with the

remote connected device automatically.

Auto-negotiation Function

When TP port is set on Auto-negotiation mode (SW1:ON), it is featured

with auto-negotiation function and full capability. It performs a negotia-

tion process for the speed and duplex configuration with the connected

device automatically when each time a link is being established.

Far End Fault Function

The FX port is facilitated with this function, which conforms to IEEE

802.3u 100BASE-FX specifications. When the FX port detects a link

failure on its receiving circuitry, it will send out an FEFI (Far End Fault

Indication) signal to the remote connected device to indicate a remote

fault is detected. It also is capable to receive FEFI signal sent from the

remote link partner. Upon receiving an FEFI signal, it indicates a link

failure occurred on the transmitting path. This function allows the con-

verter to report a fiber link fault even when a link failure occurred on

transmitting fiber cable.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 20 21

Sin comentarios

KTI Networks KC-300D-SL2A Guía de instalación Pagina 11